MAINTENANCE AND CARE

Active filters

€16.47
In Stock
Iosso Metal Polish is a powerful acid-based descaler capable of removing scale, rust, and residue from a wide range of materials, including steel, copper, brass, faucets, showers, fixtures, tiles, glass, and plastic surfaces, without affecting the metals. In summary, Iosso Metal Polish is a powerful acid-based descaler capable of removing scale, rust, and residue from a wide range of materials without affecting the metals. To use it, simply spray the product onto the surface to be treated, scrub well with a sponge, leave it to act for about a minute, and rinse thoroughly with water.
€15.85
In Stock
The Iosso Fiberglass & Metal Polish is a product specifically formulated for cleaning and polishing metal surfaces such as stainless steel, brass, chrome, aluminum, silver, and copper, as well as fiberglass and plastic materials. Thanks to its versatility, the Iosso Fiberglass & Metal Polish is an essential product on board. In summary, using the Iosso Fiberglass & Metal Polish is easy. Simply apply a small amount of product to the surface to be treated, rub in circular motions until the paste turns black and oxidation residue appears, remove the residue with a clean cloth, and for maximum shine, go over the surface with a clean cloth.
€5.98
In Stock
The Iosso Fiberglass & Metal Polish is a product specifically formulated for cleaning and polishing metal surfaces such as stainless steel, brass, chrome, aluminum, silver, and copper, as well as fiberglass and plastics. Thanks to its versatility, the Iosso Fiberglass & Metal Polish is an essential product to have on board. In summary, using the Iosso Fiberglass & Metal Polish is easy. Just apply a small amount of the product to the surface to be treated, rub in circular motions until the paste turns black and oxidation residue appears, remove the residue with a clean cloth, and for maximum shine, polish the surface with a clean cloth.
€18.91
In Stock
Iosso Raft Lux Protective Polish for Inflatable Boats is a product specifically formulated to protect the tubes of the inflatable boats (Hypalon, PVC, etc.) from stains and the aggression of external agents such as saltwater and UV rays. Additionally, it provides a shiny finish and makes the fabric flexible without making it slippery. In summary, using Iosso Raft Lux Protective Polish for Inflatable Boats is easy. Just clean the inflatable boat tubes thoroughly, dry them well, and apply the product directly onto the surface using a soft cloth or sponge. Repeat the application if necessary and let it dry for a few minutes before using the boat. Remember to avoid contact with eyes and skin and to only use the product on the inflatable boat tubes.
€11.59
In Stock
Iosso Golden Teak Brightener is an ideal bleach for removing weathering grayness from teak coverings without the need for sanding. The product is extremely safe to use on rubber decking, as well as on fiberglass, painted, or glazed surfaces. It is important to note that Iosso Golden Teak Brightener should not be applied in direct sunlight during the hottest hours. Additionally, the product can corrode aluminum, light alloys, anodized finishes, and other delicate surfaces, so caution must be exercised during use.
€42.00
€49.41 -15%
In Stock

Nautilus Two Pack Varnish is the extremely versatile 2-component gloss or satin polyurethane varnish for outdoor use with exceptional ultraviolet resistance due to its high UVA filter content. It is ideal for masts, booms, bowsprits, handrails and anywhere where a strong, beautiful, easy transparent wood protection is required. On new or refurbished wood as a primer use 10 10 CFS or 10 10 UV. It can also be applied over previous one-pack varnishes that are at least 4 - 6 months old. It is however recommended to make a test on a small surface.

Volume ratio 2:1.

Dilution ratio 

brush/roller 10%

spray 20%.

Mixing time A+B at 20°C 6 h

Dust dry at 20°C 1 h 

Dry to touch at 20°C 3 h

Drying time at 20°C 16 h

Yield 13-15 m2/L

€12.08
€13.42 -10%
In Stock

The polyurethane thinner is specifically formulated for use with two-component paints, such as NAUTILUS TWO PACK VARNISH and polyurethane enamel. Ideal for spray and brush applications, it guarantees a uniform, high quality finish.

Key Features:

Versatile application: Perfect for spray (approx. 15-25%) and brush application (max. 5%).

Correct Mixing: When preparing the two components, it is essential to observe the correct mixing ratio. Mix thoroughly, allow to stand for at least 10 minutes, add the thinner, mix well again and apply immediately.

Compatibility:

CEC-0850 Nautilus Two Pack Varnish: Thins 10 to 20%.

CEC-0852 Nautilus Polyurethane Enamel: Thins 10 to 40%.

Application Method:

Spray

Brush

€34.74
€40.87 -15%
In Stock
1KG package.

Additive for excellent quality graphite-based anti-osmosis treatment.

It is a very fine black powder that disperses easily in C-Systems 10 10 CFS once mixed, making the mixture thixotropic, dense, and suitable for vertical application up to 150 microns.

Easy to apply with a roller and brush.

€178.36
€209.84 -15%
Last items in stock

Ultra-fast epoxy system (10 minutes setting time) with a 1:1 weight ratio (packages totalling 800 g). Exceptional for quickly and securely gluing all items on board, for safe and professional work on frames, upholstery, plastic, fibreglass, wood, leather, rubber, etc. Extremely reliable, safe and efficient, it is indispensable for all finishing work, reducing processing and installation times.

4.5 kg pack.

It is advisable to use a dry spatula.